Apply for a trade account

Bulk peptide API powder

Short answerInternational Wholesale Peptides supplies bulk peptide API powder to licensed pharmacies and licensed manufacturers. Each lot carries a certificate of analysis reporting identity by mass spectrometry, purity by HPLC, peptide content and salt form, with endotoxin where relevant, and a stated manufacturing origin. Buyers carry out their own supplier qualification.

Updated · 5 min read

Format
Lyophilized peptide powder in sealed containers
Buyers
Licensed pharmacies and licensed manufacturers
Per-lot tests
Identity (MS), purity (HPLC), peptide content
Salt form
Stated on the certificate
Sterility
Non-sterile unless the certificate reports a result
Storage and shelf life
Per certificate

International Wholesale Peptides (IWP) supplies bulk peptide API powder to licensed pharmacies and licensed manufacturers. Each lot ships in sealed containers with a certificate of analysis that names the testing laboratory, and origin is stated per lot. We sell the bulk substance only. We do not sell finished compounded drugs.

Gram and kilogram sizes, with a test quantity first

Bulk enquiries arrive in two sizes: a few grams to qualify the material, then kilograms to produce with it. The order is built the same way.

Step Quantity What the buyer receives What happens next
1. Qualification quantity Grams. The pack size is stated on the quote Sealed pack from a named lot, with the certificate for that lot The buyer runs its own incoming tests and compares them with the certificate
2. Production quantity Kilograms. Pack sizes are stated on the quote Sealed packs from the same lot where available, or from a new lot with its own certificate Repeat orders follow the same specification

Send the compound, the salt form, the purity specification and both quantities in one request. The quote then prices the test quantity and the production quantity together, and states whether the production quantity can be held from the same lot while the test is run. Raw-material certificates are available on request.

Bulk peptide API powder: specification

Attribute Specification
Form Lyophilized peptide powder, as the salt stated on the certificate
Container Sealed primary container inside a moisture-barrier outer pack. Materials are stated on the quote
Closure Screw closure with liner and a tamper-evident seal
Fill By weight, in the pack size set on the quote. The label states gross powder weight
Label Product name, lot number, gross weight, storage condition and origin
Storage Per certificate
Shelf life Per certificate, as a retest or expiry date
Shipping Stock-list items leave in 2 to 5 business days. Most product is made to order in about 3 weeks. Shipping condition is stated on the quote
Documents Certificate of analysis and origin statement. Lot origin file for USA-Synthesized lots

Pack size and container are agreed on the quote so that a pharmacy can order the quantity it will use from one opening where possible.

What the certificate reports for an API lot

Line What it tells the buyer
Identity by mass spectrometry The main component has the mass of the stated sequence
Purity by reversed-phase HPLC The share of peptide-related material that is the target
Peptide content The share of the powder that is peptide
Salt form The counter-ion, for example acetate or trifluoroacetate
Bacterial endotoxin by LAL, where relevant Endotoxin units per milligram against the stated limit
Sterility by USP <71>, where relevant The result for the units sampled
Testing laboratory Who produced the results

Why peptide content drives the formula

HPLC purity and peptide content measure different things. Purity is a ratio of peak areas among peptide-related species. Peptide content is a mass fraction of the whole powder. The gap is filled by counter-ion and water.

Purity and peptide content measure different things and should not be multiplied to estimate the quantity of target peptide. A formula has to be built from an assay against a qualified reference standard, lot by lot.

Counter-ions: TFA and acetate

Solid-phase synthesis ends with cleavage in trifluoroacetic acid, and preparative HPLC normally uses a trifluoroacetic acid modifier. The peptide is therefore first isolated as a trifluoroacetate salt. A salt exchange step, by ion exchange or by a further chromatography pass, replaces it with acetate. Each basic residue and the N-terminus can carry one counter-ion, so a peptide with several lysine or arginine residues holds more counter-ion by mass. The certificate states the salt form. The peptide synthesis guide explains where each step sits.

Endotoxin and bioburden

Endotoxin is not removed by a sterilizing filter and is not destroyed by freeze-drying. It has to be low in the bulk substance if the downstream product has an endotoxin limit. Where endotoxin was tested, the certificate shows the result. The endotoxin and sterility testing guide covers LAL methods and interference.

Handling bulk peptide powder on receipt

Lyophilized peptide powder is hygroscopic and often carries static charge. Both affect weighing.

  1. Check the pack. Confirm the lot number against the certificate and the packing list. Check that the tamper-evident seal is intact.
  2. Equilibrate before opening. Let a cold container reach room temperature while still sealed. Opening it cold draws condensation onto the powder.
  3. Weigh in controlled humidity. Water uptake during weighing raises the apparent mass and lowers the true peptide content of what was weighed.
  4. Limit openings. Each opening exposes the remainder to moisture. Subdivide once under controlled conditions if the lot will be used over time, and record it.
  5. Test incoming material. Run identity and any other tests your procedures require before the lot is released for use.

Store to the condition stated on the certificate. Shelf life is stated per certificate and assumes the container has stayed sealed in that condition.

Who can order and how

Bulk API powder is for licensed pharmacies and licensed manufacturers. The page for compounding pharmacies sets out the regulatory position in the United States as of November 2026 and the documents a pharmacy receives. Every buyer carries out its own supplier qualification, and the peptide API supplier checklist lists the questions to ask.

Origin is stated per lot. For bulk active the statement names where the active was made: in the United States for USA-Synthesized lots, or outside the United States with the source country disclosed. Volume supply and reserved lots are described on the bulk peptides page.

The order path is apply, business verification, quote, order. A first order of made-to-order product starts from US$10,000, prepaid by bank wire or ACH. The qualification quantity is quoted as the test step for bulk active. Outside the United States, we ship only where a lawful route exists, normally through a licensed importer or licensed pharmacy, and we confirm it in writing first. To request a quote, apply for an account. Each lot's certificate of analysis can be checked by lot number on this site.

Buying active to have a finished product made elsewhere

Some buyers order bulk active to send to their own tablet, strip or filling contractor. We can quote the finished format as well, so the buyer can compare one supplier for the active and the finished goods against two. The capabilities page lists the finished formats, custom formulation and the documents that ship with an export order.

Frequently asked questions

Who can buy bulk peptide API powder?

Licensed pharmacies and licensed manufacturers, after business verification. Companies with a suitable laboratory facility can also be quoted bulk powder for non-clinical development work. We do not sell bulk powder to individuals, clinics or unlicensed resellers, and delivery is made to the licensed or verified premises.

Is bulk API powder sterile?

Handle it as a non-sterile bulk substance unless the certificate for that lot reports a sterility result. Endotoxin is reported where relevant. A pharmacy or manufacturer that makes a sterile product from the powder is responsible for its own sterilization step and release testing.

How much of the powder is actually peptide?

The peptide content line on the certificate gives the figure. Lyophilized peptide powder contains counter-ion and residual water as well as peptide, so content is commonly well below 100% even at high HPLC purity. Formulas should be calculated from peptide content for the lot in use.

What is the difference between acetate and TFA salt?

Both are counter-ions paired with the basic groups of the peptide. Trifluoroacetate comes from preparative HPLC. Acetate is introduced by a salt exchange step. They differ in mass, so the same peptide has a different peptide content in each form. The certificate states which salt the lot is.

Can I order a small test quantity before a bulk order?

Yes. A buyer can order a qualification quantity in grams, with the lot certificate, test it under its own procedures, and then order the production quantity in kilograms, from the same lot where available. Pack sizes, the quantity available from a lot and the price at each size are stated on the quote.

Do you supply the manufacturing site details?

Origin is stated for every lot under one of three origin statements. For USA-Synthesized lots, the lot origin file names the synthesis site and the fill-and-finish site. For other lots, the source country of the active is disclosed. Buyers use these details as part of their own qualification.

Open a trade account

Tell us what you buy and where you ship. We verify your business, confirm the lawful route in writing and send a quote.

Apply for a trade account