Apply for a trade account

Peptide supplier for contract manufacturers and CDMOs

Short answerInternational Wholesale Peptides is a peptide supplier for contract manufacturers, including CDMOs, fill-finish sites and cosmetic manufacturers. It sells bulk API powder and cosmetic peptide actives to the manufacturing site, with a certificate of analysis naming the testing laboratory and an origin statement per lot, for the site's vendor qualification.

Updated · 6 min read

Buyers
CDMOs, fill-finish sites, cosmetic and supplement manufacturers
Product classes
Bulk API powder; cosmetic peptide actives
Per-lot documents
Certificate of analysis, origin statement, lot file
Who can hold the account
The manufacturer, or its client with delivery to the site
Lot continuity
Reserved lots on a supply program for top-band accounts
Entry
Evaluation order of stock-list items from US$2,500, prepaid

International Wholesale Peptides (IWP) is a peptide supplier for contract manufacturers: CDMOs, fill-finish sites, and cosmetic and supplement manufacturers that buy ingredients for their clients' products. We sell bulk API powder and cosmetic peptide actives to the manufacturing site. Each lot carries a certificate of analysis naming the testing laboratory and an origin statement, which is where a site's vendor qualification starts.

Who this page is for

This page is for purchasing, supplier quality and project management staff at contract development and manufacturing organizations, sterile fill-finish and lyophilization sites, 503B outsourcing facilities, and cosmetic and supplement contract manufacturers. It is also for a brand that has been told by its manufacturer to nominate a qualified ingredient source.

What a contract manufacturer can buy

Product class Typical pack Documents Route
Bulk API powder Sealed containers; pack size set on the quote Certificate of analysis with identity, purity, peptide content, and endotoxin where relevant; origin statement; lot file naming the synthesis site Licensed pharmaceutical manufacturers, outsourcing facilities and pharmacies
Cosmetic peptide actives Sealed containers of powder Certificate of analysis, INCI name, salt form, peptide content, origin statement Cosmetic manufacturers, for topical products
Ingredient for an oral supplement Sealed containers of powder Specification, certificate of analysis, origin statement Supplement manufacturers, only where the ingredient lawfully qualifies in the market of sale
Research-grade lyophilized vials Kits of 10 vials Certificate of analysis per lot The site's analytical laboratory only. Not for human or veterinary use

Specifications are on the bulk API powder page and the cosmetic peptide actives page.

The lawful route for a contract manufacturer

This summary is as of November 2026 and is not legal advice.

A contract manufacturer works under its own license and under its client's regulatory position. Both have to hold.

Type of site License or registration in general terms What decides whether our material can be used
Pharmaceutical CDMO Manufacturing authorization or FDA establishment registration, operating under cGMP The client's regulatory file and the site's quality unit
503B outsourcing facility FDA registration as an outsourcing facility Federal rules on which bulk substances may be used, which the facility must confirm
Cosmetic manufacturer Facility registration under MoCRA in the United States; good manufacturing practice under ISO 22716 in the EU The brand's safety assessment and ingredient specification
Supplement manufacturer Good manufacturing practice under 21 CFR Part 111 in the United States Ingredient status in the market of sale, which the brand must establish

Outside the United States we ship only where a lawful route exists for the product and the buyer, normally with the manufacturer or a licensed importer as importer of record, and we confirm the route in writing. Supply is worldwide on that basis. Every country is assessed on request, and where a market restricts a product class the route is assessed case by case.

How contract manufacturers qualify a peptide supplier

Purchasing at a contract manufacturer does not choose suppliers. The quality unit approves them, and the client often has a say. The sequence below is the one we see most often.

Step Owner What we provide
Material request Client or project manager Specification and a quote for the item and line
Vendor qualification Supplier quality Completed questionnaire, manufacturer and site details, certificate of analysis for a recent lot
Specification agreement Quality control Test list, methods reported and acceptance limits as stated on our specification
Evaluation lot Quality control and development A lot from stock for incoming testing and a trial batch
Approval and listing Quality unit Any further statements confirmed for the item
Routine supply Purchasing Lots against purchase orders, each with its certificate
Change control Supplier quality Notice arrangements as agreed at qualification

Three things shorten this process. Send the vendor questionnaire with the application. Tell us whether the client or the manufacturer will hold the account. State which origin option the project specifies. USA-Synthesized, US-Finished and Standard lots come from different manufacturing sites, so qualification is per origin and a site should not assume approval of one covers another. The API supplier checklist lists the questions in the order most quality units ask them.

What incoming quality control should expect

  • Identity. The certificate reports identity by mass spectrometry. The site performs its own identity test on receipt, as its procedures require.
  • Purity and peptide content. Purity by HPLC and peptide content are reported separately. Batch calculations use peptide content. The HPLC purity guide explains the difference.
  • Counter-ion and water. The salt form is stated. Peptides are hygroscopic, so weigh under controlled humidity and reseal promptly.
  • Endotoxin and sterility. Reported where relevant to the product class. Bulk powder for sterile manufacturing is processed and tested by the site under its own validated process.

Client-supplied or manufacturer-purchased

Arrangement Who holds the account Who qualifies the supplier Practical effect
Client-supplied material The client The manufacturer, usually with a reduced scope agreed with the client The client carries supply risk and owns the stock
Manufacturer-purchased The manufacturer The manufacturer in full The manufacturer adds the material to its approved list and can use it for other clients

Either works for us. We need the verified business that pays and the site address that receives.

Fill-finish and lyophilization sites

A site that fills and freeze-dries a client's peptide product asks about the bulk in more detail than other buyers: solubility in the fill solution, behavior on filtration, and the amount of peptide per container after correction for peptide content. We provide the lot data. Process development and validation are the site's work.

Order pattern and accounts

Contract manufacturers buy to a campaign. A development lot comes first, then engineering or pilot batches, then production batches. Sites want every batch in a campaign to come from one qualified lot.

  • Evaluation order: stock-list items from US$2,500, once per account, prepaid by bank wire or ACH. Suits evaluation lots and development quantities. Stock-list items leave in 2 to 5 business days.
  • Production orders: made-to-order product from US$10,000 on a first order, in about 3 weeks. Price is set by order value in four bands: under US$10,000; US$10,000 to US$20,000; US$20,000 to US$30,000; and US$30,000 and over, which carries the lowest price. Accounts in the top band can agree a supply program with reserved lots and a forward schedule aligned to the production plan.

What we need at application

Item Why we ask
Legal entity name, registration number and address To verify the business
Manufacturing license, authorization or facility registration To confirm the site may receive the product class
Type of site and the product category of the project To match the product class and route
Whether the account holder is the manufacturer or its client To invoice and document correctly
Vendor qualification questionnaire and required statements To complete qualification before the first order
Items, product line, quantity per batch and campaign schedule To quote and plan lots
Receiving site address and storage condition available To ship to the facility that will use the material

Apply through the application page. Supplement brands should read the page for supplement and nutraceutical brands. All buyer types are on the buyers hub.

Frequently asked questions

What does IWP supply to a contract manufacturer?

Bulk peptide API powder for licensed pharmaceutical manufacturing and compounding sites, and cosmetic peptide actives for cosmetic manufacturers. Each lot ships with a certificate of analysis naming the testing laboratory and an origin statement. Finished-dose manufacturing is the contract manufacturer's work, not ours.

Can a client nominate IWP as the supplier and have goods sent to its contract manufacturer?

Yes. The client holds the account and we deliver to the manufacturing site, or the manufacturer holds the account and buys for the client's project. In both cases the manufacturer's quality unit qualifies us under its own vendor program before it uses the material.

Does IWP sign quality agreements and accept audits?

Raise both at quote stage. We state in writing, per item and product line, what we can commit to and which documents exist, before the first order. We do not describe a document or commitment as available until it has been confirmed for the specific item.

Is IWP's API suitable for manufacturing an authorized medicine?

That is a decision for the manufacturer's quality unit and its regulatory file. An authorized medicine needs an active substance made under good manufacturing practice and described in the marketing authorization. We provide the lot file and state the manufacturing basis of each line so that the site can decide.

Can research-grade vials be relabeled or filled into a client's product?

No. Research-grade product is for laboratory research by verified institutions; not for human or veterinary use. A contract manufacturer's analytical laboratory can buy it for method development or reference work. It is not a starting material for any product intended for people or animals.

How does IWP handle lot continuity for a production campaign?

Accounts in the top price band, US$30,000 and over per order, can agree a supply program: a forward schedule with reserved capacity and a reserved lot drawn down over time. That lets a site validate against one lot and run a campaign without requalifying material between batches. Other accounts buy from the stock list or made to order.

Open a trade account

Tell us what you buy and where you ship. We verify your business, confirm the lawful route in writing and send a quote.

Apply for a trade account