# Peptide blends wholesale: combination vials by component

> Peptide blends wholesale from International Wholesale Peptides covers ten combination vials, each listed by its components and the content of each component per vial. They are sold only to verified research institutions, laboratories and trade resellers, with a certificate of analysis for every lot.

Source: https://internationalwholesalepeptides.com/research-peptides/peptide-blends/
Updated: 2026-11-21

The Peptide Blends category holds vials that contain two or more compounds in one lyophilized fill. IWP lists each blend by its components and by the content of each component per vial, not by a product name. This page covers peptide blends wholesale: the ten blends in the catalogue, who may buy them, the documents per lot and how to order.

## What is in this category

A blend is one vial with a stated quantity of each component. The table gives the components in label order and the catalogue strength, written as the content of each component per vial.

| Blend, by component | Components | Catalogue strength per vial |
|---|---|---|
| [BPC-157](/compounds/bpc-157/) + [TB-500](/compounds/tb-500/) | 2 | 10 mg / 10 mg; 5 mg / 5 mg; 7 mg / 7 mg |
| BPC-157 + [TB-500 Fragment](/compounds/tb-500-fragment/) | 2 | 50 mg / 50 mg; 100 mg / 100 mg |
| [CJC-1295 no DAC](/compounds/cjc-1295-no-dac/) + [Ipamorelin](/compounds/ipamorelin/) | 2 | 5 mg / 5 mg; 10 mg / 10 mg |
| [Tesamorelin](/compounds/tesamorelin/) + Ipamorelin | 2 | 10 mg / 5 mg; 5 mg / 5 mg |
| [Selank](/compounds/selank/) + [Semax](/compounds/semax/) | 2 | 5 mg / 5 mg |
| [GHK-Cu](/compounds/ghk-cu/) + BPC-157 + TB-500 | 3 | 50 mg / 10 mg / 10 mg; 70 mg / 10 mg / 10 mg |
| GHK-Cu + BPC-157 + TB-500 + [KPV](/compounds/kpv/) | 4 | 50 mg / 10 mg / 10 mg / 10 mg |
| [NAD+](/compounds/nad-plus/) + [MOTS-c](/compounds/mots-c/) + [5-Amino-1MQ](/compounds/5-amino-1mq/) | 3 | 100 mg / 10 mg / 10 mg |
| GLP-1 + BPC-157 | 2 | 5 mg / 5 mg; 15 mg / 15 mg; 30 mg / 30 mg |
| GLP-2 + BPC-157 | 2 | 15 mg / 15 mg; 30 mg / 30 mg; 50 mg / 50 mg |

Blends do not have their own specification sheets. The chemical identity of each component is on its own compound sheet, linked in the table, and the full list is in the [compound catalog](/compounds/).

Four points apply to every blend.

**Names are generic.** A blend is identified by its components on the quote, the label and the certificate. Trade nicknames used for some combinations in the market are not used in this catalogue.

**Some blends are restricted.** GLP-1 and GLP-2 are catalogue names used as codes, not chemical names. The identity of each lot is stated on its certificate of analysis. Blends that contain a GLP code follow the rules of the [GLP Research Compounds](/research-peptides/glp-research-compounds/) category, which also lists the combinations with cagrilintide. Those blends, and the blend that contains tesamorelin, are supplied to verified research institutions only.

**The ratio is fixed per item.** Each strength in the table is a separate catalogue item with its own lot numbers. A different ratio is a different item, and whether it can be filled is stated on the quote.

**No statement is made about combined use.** The catalogue describes what a vial contains. It makes no statement about why components are combined, and the sheets give no preparation or use information.

Single-compound vials of the same components are listed in the [Research Peptides](/research-peptides/peptides/) category.

## Who can buy and how it is supplied

Blends in this category are sold to verified research institutions, laboratories, and the trade resellers that supply them, such as distributors and importers. Every buyer passes business verification before a quote is issued. IWP does not sell to individuals.

For research use only. Not for human or veterinary use. The label, the certificate and the invoice carry that restriction, and a reseller is expected to pass it on unchanged to its own verified customers. The restriction describes the intended use of the goods. It does not change the rules of a destination country, so IWP ships only where a lawful route exists for the product and the buyer, and confirms that route in writing before taking an order.

Items are supplied as [lyophilized vials](/formats/lyophilized-vials/) in kits of 10. Each lot carries one of three origin statements, USA-Synthesized, US-Finished or Standard, subject to lot availability, and the quote names the origin statement for each item. Fill sizes other than the catalogue strength are stated on the quote.

## Documents with every lot

Every lot ships with a [certificate of analysis](/quality/certificate-of-analysis/) that names the testing laboratory. It reports identity by mass spectrometry, purity by HPLC and peptide content, with endotoxin and sterility where relevant. The lot number on the label can be checked against its certificate with the [lot lookup](/quality/lot-lookup/).

| Document | What it states |
|---|---|
| Certificate of analysis | Testing laboratory, identity, purity, peptide content, lot number, retest or expiry date |
| Lot file, USA-Synthesized Line | Synthesis site, fill-and-finish site, imported inputs |
| Lot record, US-Finished | Source country of the active; filled, finished and tested in the United States |
| Lot record, Standard | Origin of the lot |
| Quote and packing list | Origin statement, fill size, pack, shipping conditions |

For a blend, the certificate identifies each component and states the content of each component per vial, so a receiving laboratory can check every component against the label.

## Ordering peptide blends wholesale

Ordering follows one sequence: application, business verification, quote, order. Prices are not published. The full trade price list and the current stock list are sent with account approval. Price is set by order value in four bands. A made-to-order first order starts at US$10,000, and one evaluation order of stock-list items from US$2,500 is allowed per account. Orders are prepaid by bank wire or ACH. Per-item price breaks apply at 50, 150, 300 and 500 kits, where one kit is 10 vials, and a reached level is kept. Stock-list items leave in 2 to 5 business days, and most product is made to order in about 3 weeks.

The full conditions are in the [wholesale terms](/wholesale-peptides/terms/). Accounts are opened through the [application page](/apply/). The other categories are listed on the [research-use-only catalogue](/research-peptides/) page.

## Frequently asked questions

### Which peptide blends are in the catalogue?

Ten combination vials. Seven hold named peptides only, including BPC-157 with TB-500, CJC-1295 no DAC with Ipamorelin, Tesamorelin with Ipamorelin and Selank with Semax. One holds NAD+, MOTS-c and 5-Amino-1MQ. Two hold BPC-157 with a GLP catalogue code. The table lists each by content per vial.

### Do blends have their own specification sheets?

No. A blend is described by its components and the content of each per vial. The chemical identity of each component is on its own compound sheet. The certificate of analysis for a blend lot identifies each component and states its content, and it names the testing laboratory.

### Can a blend be filled in a different ratio?

Each ratio in the catalogue is a separate item with its own lot numbers. A different ratio is a different item. Whether it can be filled, and the pack size and lead time that would apply, are stated on the quote after business verification.

### Who can buy from the Peptide Blends category?

Verified research institutions, laboratories, and trade resellers such as distributors and importers that supply them. Every account passes business verification before a quote is issued. IWP does not sell to individuals, and items in this category are sold for laboratory research and not for use in humans or animals.

### Are prices published for this category?

No. International Wholesale Peptides does not publish prices. Buyers apply, pass business verification and receive a quote that names the origin statement of the lot and the pack. The trade price list is sent with account approval. A made-to-order first order starts at US$10,000, a one-time evaluation order of stock-list items starts at US$2,500, and orders are prepaid by bank wire or ACH.

### Where do you ship items in this category?

Only where a lawful route exists for the product and the buyer, normally through a licensed importer in the destination country. IWP confirms the route in writing before taking an order. IWP supplies worldwide and assesses every country on request.
